ZB-F、ZB-K系列釜底泵

發布日期:2014-02-28 12:00:46 | 來源:巴特熔體泵-廣州辦事處 | 瀏覽次數:
  
ZB-F ZB-K 釜底泵 熔體泵
ZB-F、ZB-K系列釜底泵
 
ZB-F、ZB-K系列釜底泵主要用于輸送真空反應器中的中高粘度的介質,吸入口大法蘭設計,在真空條件下能使高粘度介質順利吸入。主要應用于ABS,PS,PMMA,PBT,PT等介質。
 
  技術參數
  泵體: 不銹鋼
  齒輪: M2鋼,其他材料可指定。
  滑動軸承: 高溫工具鋼,不銹鋼。
  軸封: 填料密封
  加熱系統 : 熱媒加熱 導熱油 (K系列電加熱)
  規格/流量范圍: 從0.5CC - 2500CC,  0.5cm3/rev - 2500cm3/rev
 
  操作參數
  粘度: ≤40000 Pas
  溫度: ≤400℃
  清洗溫度: ≤450℃
  進口壓力: 最高可達12MPa
  最高壓差: 可達25MPa
 
  ZB-F or ZB-K Series Melt Pump for Reaction Kettle:
  ZB-F or ZB-K series melt pump is mainly used for transporting medium or high viscosity medium out of the vacuum reaction kettle. On basis of large suction inlet flange design, the high viscosity medium is able to absorb inside under vacuum conditions. This series of melt pump is primarily applicable for ABS, PS, PMMA, PBT, PT, etc.
 
  Technical Parameter
  Material for Melt Pump Body:Stainless Steel
  Material for Gear: M2 Steel (Optional)
  Material for Sliding Bearing: High Temperature Tool Steel or Stainless Steel
  Shaft Sealing: Packing Sealing
  Heating System: Heating Medium or Conduction Oil (ZB-K series melt pump adopts electrical heating.)
  Model/Flow Range: 0.5CC - 2500CC, 0.5cm3/rev - 2500cm3/rev
 
  Operating Parameter
  Viscosity: ≤40000 Pas
  Working Temperature: ≤400℃
  Cleaning Temperature: ≤450℃
  Inlet Pressure: ≤12MPa
  Differential Pressure: ≤25MPa
熔體泵資訊
?
Copyright ? 2004-2019 by 鄭州巴特熔體泵有限公司.版權所有 TEL:+86 371 67993077 E-mail:sale@batte.cn
永久天堂网 av手机版